During the process of researching an article about green products on photovoltaic cell systems (solar panels), I came across another way to convert the sun’s light into electricity. So let’s take a look at another type of solar energy system.

This system is not new; it was originally conceived in 1816 as an industrial rival to the steam engine. It has been largely underutilized for the past century. With the need for renewable energy sources caused by the overuse of the fossil fuels interest has resurged in solar designs, and it is now being designed into many new solar collector systems.

The Stirling engine is a heat engine that is vastly different from the internal combustion engine. It is highly efficient, operates quietly and is great at converting otherwise wasted heat into kinetic energy. Its only drawback is loss of power from internal fraction. The gasses (most often air) used inside the engine remain inside and are never expelled. With no exhaust valves like a gasoline or diesel engine and with no explosions from combustion, the engines run very quietly.

The operation of the Stirling engine is not complex, it only requires an external heat source. Some heat sources have been fuel, while some solar designs use a Fernell lens, and the latest source is large parabolic mirrors.

Operation is simple: the gases are heated by an external source, causing the hot gas to move toward a cold chamber, in the process, a piston is driven and a flywheel rotated. To put it simply, movement is achieved from heat expansion. A few knock-offs of the Stirling engines are small enough to fit in your hand. Others system are designed to drive electrical generators. They are a about the size of a fifty-gallon drum.

The system is ideal when a concentrated heat source is applied, in this case sunlight. The sunlight is collected with parabolic mirrors and focused on to the surface of the hot chamber, causing the chamber to be heated and the engine to start. This temperatures can be very high. You know this from, when as a child, you took a magnifying glass and focused it on a piece of paper. When done correctly the paper would get dark and then a flame would appear.

The engine and support equipment is contained in a package small enough to be suspended from the end of a metal arm, much like the design of satellite TV systems but on a much larger scale. Some systems are producing 25K watts of power and have been installed and operational for a couple of years.

In another article on green products, I will be doing a comparison of the different types of solar energy producing products to see how they play out and if they are a viable alternative power source or just a bunch of fancy equipment.

Michael